|
|
| |
 Click to enlarge image
|
|
|
| SP-800 Infusion Pump
Technical Specification
Bolus: 600ml/h
Flow rate range: 1-600ml/h
Volume limit: 1-9999 ml
Accuracy:±5％
KVO flow rate:1ml/h, keep vein open(KVO) rate
Power supply: AC100-240V, 50/60 Hz, 25VA
Water Proof: IP ?
Battery: Rechargeable lithium polymer battery,7.4 V，1650mAh
Electrical safety: compliance with the requirements of IEC 60601-1.
Max. Power consummation: 25W
Battery recharge: When the pump is connected to the AC power, the battery will automatically recharge (About 8-14 hours to recharge fully.) Can run for more than 5 hours continuously after fully recharged.
Fuse Type:220V 2A?，12V 2A?
Display or information: Flow rate, volume limit, accumulated volume, power indicator light, bed No., air, occlusion, empty.
Alarm function: Infusion completion, occlusion, air bubble, low battery, control abnormal, no AC power supply, installation error.
Max. size of outer shell:120?40?90 mm（length?width?height）
Max. weight:＜2.5 kg
Classification: Type B.
Outer shell material: ABS plastic
Operating condition:Environment temperature:+5°C- +40°C,atmosphere pressure 50-106kPa,related humidity 30%-90%
Storage and transport condition: Environment temperature -15°C- +50°C，atmosphere pressure 50-106kPa，relative humidity 30%-90%.
Applicable infusion pipe: All standard infusion pipe(use "double dove" to test )
EMC: Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24.
|
|
| |
|
|
|
Bookmark / Share this page